Basic Specification of  18w integrat  T5 Led Tube

1)Color Temperature:2700-6500k;   

2) Beam angle:270deg;  Luminous:1500LM; 

3)Material: Aluminum Die Casting, PVC;

4)Light Source:LEDsmd ;  

5)Application: Airport, Bathroom, Bedroom, Car Park, Church,Cinema, Gallery, Garage, Hospital, Hotel, Kitchen, Meeting Room, Museum,Office, Restaurant, School, Shopping Mall, Sitting Room  ;  6)Voltage:AC90-260V

 Featuresof LED Tube:

·        .Adapting high quality LED, suchas “CREE” “OSRAM” “NICHIA” “EPISTAR” LEDs for led tube.

·        Adapting aluminum heat sinkbase and aluminum PCB to dissipate more heat.

·        Adapting lampshade materialswith more than 90% light transmittance; it is available for transparent cover,milky white cover and diffusion cover.

·        .Adapting constant current leddriver, high power factor, low harmonic distortion, stable performance.

·        Adapting rotary, lamp holder,easy installing.

·        It can be made into dimming andsensor effects, with soft light, no stroking.

 Advantages  of LED Tube:

·        Central Asia  Lighting:green lamp without Bp and Hg.

·        Using high quality and highbrightness LED as lighting source.

·        Lifespan up to 50,000hours,more than 10 times the life of the traditional fluorescent.

·        Energy saving andenvironment friendly, no noise.

 Application of LED Tube

·        Indoor lighting(living room,bedroom, kitchen, washroom,residential led lighting)

·        School hospital, hotel,factories, supermarket, shopping mall, commercial complex.

·        Parking lot, airport, subwaystation, railway station, tunnel..led tube australia.

·        Lobby, hall, square,office.linear led lamps

·        Residential/institutionbuildings.

Special design of  LEDTube

·                    Design of removable and rotatable end-cap provides quick replacement 

·                    Innertransformer if the transformer fails after some years’ usage. And lighting angle can be adju                  stable.

·                    Different from other tubes which fixing end-cap by glue, this new tube 

·                    Designed by our R&D, and it enables customers open the tube to replace

·                    Of inner-transformer by pressing the switch on the end caps easily.

Top QualityPC covers of  LEDTube:

1. We have clear; frosted strip covers fordifferent customer’s choice are

 available. 

2. PC cover is high transmittance,when light on the frosted cover, LEDs 

are invisible. 

Great Lighting source of  LEDTube:

1.we choose the chip of led is of high quality and bigger size:14*28mil.
2. Which is from Epistar in Taiwan, The lighting spaceis bigger, and the whole led tube lumen is higher

High quality power supply  of LEDTube

1. We have our own R&D team to Research the driversolution: isolated power supply and non-isolated power supply.
2. The driver is supporting made with the PCB and leds, and better to ensurethe quality.
3. Power wire welding well and the casing is better form the power protectionand safe use for working.
4. PF can reach more than 0.95.

Installation  of  LEDTube

1.Before installation please makes sure thepower is turned off.
2.For magnetic ballast. When LED tubes arereplaced in a standard fluorescent tube batten, the   starter must beremoved, and replaced by the enclosed fuse, simply and conveniently.
3.If electronic ballast, it need to be by-passedby a registered electrician.

Usage instructions:

1.Take outpackage carefully;
2.Check it have any damage, don’t try to use any damaged products;
3.Read the label parameter carefully before installation and make sure thevoltage current are correct.
4.Indoor use only;
5.Don’t vibrate tube;
6.Don’t disassemble the tube if have no authorization;
7.Don’t store tubes in humidity environment.

Aim of Our Company

Our company is manufacturer,factory and LEDproject solution provider.

Hundreds of workers and 10000 square meter non-dust workshop.

We have off-line shop and showroom in Guzhen and factory inJiangmen.

Cover a wide range of ourdoor & indoor LED which mostlysell to Euro,Mid-east,Southeast-Asia,South America.

Aimto serve our customer high quality product & services with reasonableprice 

Striveto help the company want to rapidly growing.

Quality Control  of  LED Tube:

100% of the lamps will betested and keep lighting for 24 hours to test its quality reliability , and wewill also test its temperature after 24 hours' lighting.

Thenafter it is cool we again test 100% of the lamps to see if it still work well .Each lamp should pass all these QC procedures before shipping to customer.

Paymentterms  of  LED Tube:

1. Payment term: T/T 30%deposit after order confirmed, the balance after goods ready before shipping .or L/C , or Western Union for small amount . 
2. Lead time : normally in 5~10 days after deposit received 
3. Sample policy : Samples are always availble for each model . Samples can beready in 3~7 days once payment received . 
4. Shipping port: Shenzhen/Zhongshan , China 

Delivery detail  of LED Tube:

We ship goods by UPS/DHL/FEDEX/TNT express which takes 3~ 5 daysto arrive, or by air cargo which takes about one week to arrive , or by seawhich takes about one month to arrive , depending on your actual requirements.

FAQ  of  LED Tube:

1.What are your market reach throughout the region?

Our markets around the world in every corner, we have eight yearsof experience in foreign trade, our customer base has, we have worked with usin every country buyers, producers and distributors.

2.What is your main product line is made?

We mainly produce led application classes and industrial lightingfixtures. Including daily life indoor lighting and outdoor lighting.(ledbulb,led downlight,led flood light,led panel light,led spot light,led striplight,led tube,more.

3. Your factory or trading company?

We are a factory, we provide OEM services. Some famous foreignsupermarkets and we often collaborate.

4. You have the ability to do independent research anddevelopment?

Our engineering department has 4-5 people, we have the researchand development capabilities. We also collect regularly each customer feedback,product improvement and new product development. We also hold monthly newproduct launches.

5. If I have a question I would like advice on how to contact you?

You can sns platform or directly through major inquiry and sende-mail to consult us. 

CONTACT US
Winsan
Sales   
Central Asia Group Co.,Limited
Factory：3 Tongfa Road, National Hi-Tech Zone, Jiangmen City, China
Showroom: 77  Zhongxing East Road, Guzhen, Zhongshan City, China

Moible: +86-18826415075
Website: http://centralasia.gmc.globalmarket.com/
Email: sales9@centralasia-led.com